In my last post, I wrote about the up and coming IPC-2581 PCB manufacturing file format. While IPC-2581 may be looked at by PCB fabricators and assemblers as a holy grail of sorts, it’s not yet widely adopted by CAD software. But, that doesn’t mean that Gerbers are the only option.

ODB++ was developed by Valor in the waning years of the last century as an improved method for getting manufacturing data into their CAM systems. Valor and, hence, ODB++ was purchased by Mentor Graphics in 2010. ODB++ is still widely available, however there’s concern in some circles that it’s not truly open. That concern is where IPC-2581 came from. In fact, IPC-2581 is somewhat derivative of ODB++.

I can see how a CAD software developer might fear the use of something owned by a rival. However, my understanding is that Mentor does it’s best to treat it like an open standard and has made it available more or less as though it is open.

The history isn’t really important. What is important is that ODB++ is a more complete format than the Gerber and is widely supported. Pretty much everything good that I said about IPC-2581 in my prior post also applies to ODB++.

The bottom line is that, regardless of whether Screaming Circuits is your fab (through our partner Sunstone) and assembly (through our factory right here) provider, ODB++ is a good thing. It makes the job easier and more accurate than does use of Gerber files. Both “easier” and “more accurate” help keep costs down and keep ambiguities to a minimum. As you know, ambiguity is the bitter enemy of both accuracy and quality.

Unfortunately, for all of you Eagle users, Eagle does not yet support ODB++. If anyone out there is really good with Eagle ULP scripting, you might want to create a on ODB++ and/or IPC-2581 creation ULP.

Duane Benson
I was ionized, but I’m better now. 

http://blog.screamingcircuits.com/